CINTROPUR FILTERS : INDUSTRIAL RANGE

Cintropur nw500 , nw650 & nw800

Cintropur low-pressure inline industrial water filters

The Cintropur low-pressure inline industrial filters (NW500, NW650 and NW800) are a robust, reliable and inexpensive and an ideal solution for protecting industrial water sprying installations and protection of water softeners, revers osmosis units or ultraviolet water disinfection..

Filter sleeves are available in 5, 10, 25, 50, 100, 150 and 300 microns

Providing maximum filtration with minimal flow restriction this Cintropur filters remove sludge and sediment and, along with our activated carbon filters, eliminate bad taste and odours.

High flow rate

Low pressure drop

Robust and reliable

Inexpensive

Cintropur NW500 delivers up to 18 m3/h of filtered water with a pressure drop as low as 0.2 bar. Standard operating pressure is 10 bar and the maximum pressure is 16 bars. The standard hydraulic connection is a 2″ inch fitting.

Cintropur NW650 delivers up to 25 m3/h of filtered water with a pressure drop as low as 0.2 bar. Standard operating pressure is 10 bar and the maximum pressure is 16 bars. The standard hydraulic connection is a 2 1/2″ inch fitting.

Cintropur NW800 delivers up to 32 m3/h of filtered water with a pressure drop as low as 0.2 bar. Standard operating pressure is 10 bar and the maximum pressure is 16 bars. The standard hydraulic connection is a 3″ inch fitting.

Dimensions

Technical data

Basic principle and advantages

Made entirely from first quality synthetic material, CINTROPUR filters are perfectly suitable for food products and drinking water.

The CINTROPUR vane transforms the liquid flow into a centrifugal spin by throwing the larger particles down into the lower bowl while the filters sleeves prevent smaller particles from passing through. The bowls transparency facilitates visual inspection of the sleeves condition and the level of deposits to be purged via the drain tap.